REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE MANIFOLD STAY WITH VACUUM SWITCHING VALVE |
Disconnect the 2 connectors.

Disconnect the 4 vacuum hoses.

Remove the 2 bolts and manifold stay with VSV.

| 3. DISCONNECT NO. 2 VACUUM TRANSMITTING HOSE |
| 4. DISCONNECT NO. 1 VACUUM TRANSMITTING HOSE |
| 5. DISCONNECT NO. 3 VACUUM TRANSMITTING HOSE |
| 6. REMOVE NO. 1 VACUUM SWITCHING VALVE (for EGR Cut) |
Remove the screw and No. 1 VSV.

| 7. REMOVE NO. 2 VACUUM SWITCHING VALVE (for No. 2 EGR) |
Remove the screw and No. 2 VSV.

