2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT NO. 1 VACUUM SWITCHING VALVE (for EGR Cut)

  1. A099942E02
    Measure the resistance of the VSV.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    37 to 44 Ω at 20°C (68°F)
    1 - Body Ground
    2 - Body Ground
    1 MΩ or higher

    If the result is not as specified, replace the vacuum switching valve.

  1. A151248E01
    Check operation of the VSV.

    1. Attach a vacuum pump to port E, check that vacuum does not flow from the filter to port E.
      If the result is not as specified, replace the vacuum switching valve.

    2. A151249E01
      Apply battery voltage across terminals 1 and 2.

    3. Attach a vacuum pump to port E, and check that vacuum flows from the filter to port E.
      If the result is not as specified, replace the vacuum switching valve.


INSPECT NO. 2 VACUUM SWITCHING VALVE (for No. 2 EGR)

  1. A147239E01
    Measure the resistance of the VSV.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    37 to 44 Ω at 20°C (68°F)
    1 - Body Ground
    2 - Body Ground
    1 MΩ or higher

    If the result is not as specified, replace the vacuum switching valve.

  1. A147240E03
    Check operation of the VSV.

    1. Attach a vacuum pump to port E, and check that vacuum flows from the filter to port E.
      If the result is not as specified, replace the vacuum switching valve.

    2. A147241E01
      Apply battery voltage across terminals 1 and 2.

    3. Attach a vacuum pump to port F, and check that vacuum flows from port E to port F.
      If the result is not as specified, replace the vacuum switching valve.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →