REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY |
Remove the 3 bolts, 2 nuts and engine cover.

| 3. REMOVE GAS FILTER |
Disconnect the 2 vacuum hoses.

Remove the bolt and gas filter with the gas filter bracket.
| 4. REMOVE ELECTRIC VACUUM REGULATING VALVE |
Disconnect the connector.

Disconnect the 4 vacuum hoses.

Remove the 2 bolts and electric vacuum regulating valve.

- NOTICE:
- Do not remove the electric vacuum regulating valve.
