REASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
INSTALL COOLER DRYER |
 |
Using pliers, install a new cooler dryer to the modulator.
Text in Illustration
*1
|
Modulator
|
- Apply sufficient compressor oil to a new O-ring and the cap fitting surface.
- Compressor oil:
- ND-OIL 8 or equivalent
- Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.
-
Torque:
- 2.9 N*m{
30 kgf*cm
, 26 in.*lbf
}
| 2.
INSTALL NO. 3 COOLER CONDENSER BRACKET |
 |
Install the No. 3 cooler condenser bracket with the 2 bolts.
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 3.
INSTALL NO. 2 COOLER CONDENSER BRACKET |
 |
Install the No. 2 cooler condenser bracket with the 2 bolts.
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 4.
INSTALL NO. 1 COOLER CONDENSER BRACKET |
 |
for Driver Side:
Install the No. 1cooler condenser bracket with the 2 bolts.
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}
for Passenger Side:
Install the No. 1cooler condenser bracket with the 2 bolts.
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}