DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
REMOVE NO. 1 COOLER CONDENSER BRACKET |
 |
- for Driver Side:
Remove the 2 bolts and No. 1 cooler condenser bracket.
- for Passenger Side:
Remove the 2 bolts and No. 1 cooler condenser bracket.
| 2.
REMOVE NO. 2 COOLER CONDENSER BRACKET |
 |
Remove the 2 bolts and No. 2 cooler condenser bracket.
| 3.
REMOVE NO. 3 COOLER CONDENSER BRACKET |
 |
Remove the 2 bolts and No. 3 cooler condenser bracket.
| 4.
REMOVE COOLER DRYER |
 |
Using a 14 mm straight hexagon wrench, remove the cap from the modulator.
Text in Illustration
*1
|
Modulator
|
- Using pliers, remove the cooler dryer.