INSTALLATION
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Multi-information Display) |
Attach the 4 pins to install the steering pad switch.
Install the 2 screws.
Connect the connectors and attach the 2 clamps.
| 2. INSTALL STEERING PAD SWITCH LH (w/o Multi-information Display) |
- HINT:
- Refer to the step "INSTALL STEERING PAD SWITCH ASSEMBLY".
| 3. INSTALL STEERING PAD ASSEMBLY |
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 5. CHECK SRS WARNING LIGHT |
