INSTALLATION
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
INSTALL TRANSPONDER KEY AMPLIFIER |
 |
Connect the transponder key amplifier connector.
- Align the claw of the transponder key amplifier with the upper bracket.
Push in the transponder key amplifier and install it to the upper bracket.
- NOTICE:
- Do not push in the amplifier with excessive force as it may be damaged.
| 2.
INSTALL STEERING COLUMN UPPER COVER
|
 |
Install the cover lower with the 3 screws.
| 3.
INSTALL STEERING COLUMN LOWER COVER
|
 |
Install the cover lower with the 3 screws.
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 5.
CHECK SRS WARNING LIGHT |
 |
For vehicles with SRS:
(Click here)
| 6.
CHECK ENGINE START |
 |
Start the engine. Then check that the engine idles.