REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE RADIATOR GRILLE |
Put protective tape around the radiator grille.

Text in Illustration *1
Protective Tape
Remove the 2 clips and 2 screws.
Detach the 6 claws and remove the radiator grille.

| 2. REMOVE FRONT BUMPER COVER |
Remove the 3 clips and 6 screws.

Put protective tape around the front bumper cover.

Text in Illustration *1
Protective Tape
Remove the 2 bolts, 2 screws and 5 clips.
w/ Fog Light:
Disconnect the 2 fog light connectors.
w/ Headlight Cleaner System:
Disconnect the No. 1 headlight cleaner hose.
Detach the 6 claws and remove the front bumper cover.

| 3. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY LH (for 4WD and Pre-Runner) |
Remove the 2 clips, 3 bolts and engine side cover.

| 4. REMOVE ENGINE SIDE COVER SUB-ASSEMBLY RH (for 4WD and Pre-Runner) |
- HINT:
- Use the same procedure described for the LH side.
| 5. REMOVE ENGINE UNDER COVER (except 4WD and Pre-Runner) |
Remove the 4 clips, 5 bolts and engine under cover.

| 6. REMOVE FRONT BUMPER REINFORCEMENT EXTENSION LH (for 4WD and Pre-Runner) |
Detach the 2 claws and remove the front bumper reinforcement extension.

| 7. REMOVE FRONT BUMPER REINFORCEMENT EXTENSION RH (for 4WD and Pre-Runner) |
- HINT:
- Use the same procedure described for the LH side.
| 8. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY |
![]() ![]() |
Remove the 4 nuts and front bumper reinforcement.
| 9. REMOVE FRONT BUMPER MOUNTING BRACKET |
- HINT:
- Use the same procedure for both front bumper mounting brackets.
Remove the bolt and front bumper mounting bracket.

| 10. REMOVE RADIATOR SIDE DEFLECTOR LH |
Remove the 3 clips.

Detach the claw and remove the radiator side deflector.
| 11. REMOVE RADIATOR SIDE DEFLECTOR RH |
- HINT:
- Use the same procedure described for the LH side.
| 12. REMOVE NO. 2 FRONT BUMPER RETAINER BRACKET |
Remove the bolt and No. 2 front bumper retainer bracket.

| 13. REMOVE NO. 1 FRONT BUMPER RETAINER BRACKET |
- HINT:
- Use the same procedure described for the No. 2 front bumper retainer bracket.
| 14. REMOVE FRONT BUMPER SIDE SUPPORT LH |
Remove the screw and bolt.

Detach the 2 claws and remove the front bumper side support.
| 15. REMOVE FRONT BUMPER SIDE SUPPORT RH |
- HINT:
- Use the same procedure described for the LH side.

