DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE FRONT BUMPER EXTENSION LH (w/ Outside Moulding) |
Remove the 8 retainers and front bumper extension.

| 2. REMOVE FRONT BUMPER EXTENSION RH (w/ Outside Moulding) |
- HINT:
- Use the same procedure described for the LH side.
| 3. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System) |
Extend the headlight washer nozzle by hand.

- NOTICE:
- Be careful not to damage the headlight washer actuator sub-assembly or headlight washer nozzle sub-assembly LH.
Detach the 2 claws and remove the type 1 headlight washer nozzle sub-assembly LH.

| 4. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
- HINT:
- Use the same procedure described for the LH side.
| 5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System) |
Disconnect the washer hose.

Remove the bolt.
Detach the 2 claws and remove the headlight washer actuator sub-assembly LH.

| 6. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
- HINT:
- Use the same procedure described for the LH side.
| 7. REMOVE NO. 1 HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System) |
Detach the 3 clamps and remove the No. 1 headlight cleaner hose from the front bumper cover.

| 8. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
Remove the 3 bolts and fog light assembly LH.

| 9. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
- HINT:
- Use the same procedure described for the LH side.
| 10. REMOVE FRONT BUMPER HOLE COVER LH |
Detach the 3 claws and remove the front bumper hole cover.

| 11. REMOVE FRONT BUMPER HOLE COVER RH |
- HINT:
- Use the same procedure described for the LH side.
| 12. REMOVE NO. 1 LOWER RADIATOR GRILLE |
Detach the 13 claws and remove the No. 1 lower radiator grille.

| 13. REMOVE NO. 1 RADIATOR GRILLE SEAL |
Detach the 13 clips and remove the double-sided tape and No. 1 radiator grille seal.

Text in Illustration *1
Double-sided Tape
| 14. REMOVE RADIATOR GRILLE MOULDING |
Remove the 7 screws.

Detach the 18 claws and remove the radiator grille moulding.

| 15. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
Detach the 3 claws and remove the radiator grille (or front panel) emblem.

