2014 Hilux · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for RHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the RH side.


1. INSTALL FRONT POWER SEAT SWITCH RH
  1. Connect the connector.

  1. Install the front power seat switch RH with the 3 screws.


2. INSTALL FRONT SEAT CUSHION SHIELD RH
  1. Attach the claw and guide to install the front seat cushion shield RH.

  1. Install the 3 screws.

  1. Install the 2 screws.


3. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B207446
    Attach the 4 claws to install the slide and vertical power seat switch knob.


4. INSTALL RECLINING POWER SEAT SWITCH KNOB

  1. B207447
    Attach the 2 claws to install the reclining power seat switch knob.


5. INSTALL FRONT SEAT ASSEMBLY
(Click here)

6. INSPECT FRONT SEAT ASSEMBLY
(Click here)
← INSPECTION (from Jun 2011)INSTALLATION (Aug 2012 – Jul 2013) →