2014 Hilux · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT FRONT POWER SEAT SWITCH RH (for RHD)

  1. B277287E03
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Reclining Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 3 (RCLF)
    Front
    Below 1 Ω
    2 (RCLR) - 4 (E)
    3 (RCLF) - 4 (E)
    Off
    2 (RCLR) - 4 (E)
    1 (B) - 2 (RCLR)
    Rear
    3 (RCLF) - 4 (E)

    Slide Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 9 (SLDF)
    Front
    Below 1 Ω
    6 (SLDR) - 4 (E)
    9 (SLDF) - 4 (E)
    Off
    6 (SLDR) - 4 (E)
    1 (B) - 6 (SLDR)
    Rear
    9 (SLDF) - 4 (E)

    Rear Lifter Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 8 (LUP)
    Up
    Below 1 Ω
    7 (LDWN) - 4 (E)
    8 (LUP) - 4 (E)
    Off
    7 (LDWN) - 4 (E)
    1 (B) - 7 (LDWN)
    Down
    8 (LUP) - 4 (E)

    If the result is not as specified, replace the front power seat switch RH.
    Text in Illustration 
    *1
    Reclining Switch
    *2
    Slide Switch
    *3
    Rear Lifter Switch
    *4
    Component without harness connected
    (Power Seat Switch RH)


INSPECT FRONT POWER SEAT SWITCH LH (for LHD)

  1. B277641E01
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Reclining Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 3 (RCLF)
    Front
    Below 1 Ω
    2 (RCLR) - 4 (E)
    3 (RCLF) - 4 (E)
    Off
    2 (RCLR) - 4 (E)
    1 (B) - 2 (RCLR)
    Rear
    3 (RCLF) - 4 (E)

    Slide Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 9 (SLDF)
    Front
    Below 1 Ω
    6 (SLDR) - 4 (E)
    9 (SLDF) - 4 (E)
    Off
    6 (SLDR) - 4 (E)
    1 (B) - 6 (SLDR)
    Rear
    9 (SLDF) - 4 (E)

    Rear Lifter Switch:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (B) - 7 (LUP)
    Up
    Below 1 Ω
    8 (LDWN) - 4 (E)
    7 (LUP) - 4 (E)
    Off
    8 (LDWN) - 4 (E)
    1 (B) - 8 (LDWN)
    Down
    7 (LUP) - 4 (E)

    If the result is not as specified, replace the front power seat switch LH.
    Text in Illustration 
    *1
    Reclining Switch
    *2
    Slide Switch
    *3
    Rear Lifter Switch
    *a
    Component without harness connected
    (Front Power Seat Switch LH)

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →