2014 Hilux · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for RHD vehicles.
  3. Use the same procedure for the RH and LH sides.
  4. The procedure listed below is for the RH side.


1. REMOVE FRONT SEAT ASSEMBLY
(Click here)

2. REMOVE RECLINING POWER SEAT SWITCH KNOB

  1. B207076E02
    Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

  1. B207077E02
    Apply protective tape around the front seat cushion shield.

  1. Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape


4. REMOVE FRONT SEAT CUSHION SHIELD RH

  1. B207078
    Remove the 2 screws.

  1. B207039
    Remove the 3 screws.

  1. Detach the claw and guide.

  1. Remove the front seat cushion shield RH.


5. REMOVE FRONT POWER SEAT SWITCH RH

  1. B207080
    Remove the 3 screws.

  1. Disconnect the connector and remove the front power seat switch RH.

← REMOVAL (Jun 2011 – Jul 2012)REMOVAL (from Aug 2013) →