INSTALLATION
Removal / installation · Vehicles built from Aug 2013
| 1. INSTALL NO. 1 NAVIGATION ANTENNA CORD SUB-ASSEMBLY |
Attach the clamp to install the No. 1 navigation antenna cord sub-assembly, and then connect the connector.
| 2. INSTALL NAVIGATION ANTENNA ASSEMBLY |
Install the navigation antenna assembly with the 2 screws.
Connect the connector and attach the clamp.
| 3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
