2014 Hilux · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT POWER SEAT MOTOR ASSEMBLY (for Reclining)

  1. w/o Front Seat Side Airbag:
    Check the operation of the power seat motor assembly (for Reclining).

    1. B206436E02
      Apply battery voltage to the power seat motor assembly (for Reclining).

    2. Check that the motor gear rotates smoothly as follows.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 2
      Battery negative (-) → 1
      Motor gear rotates clockwise
      Battery positive (+) → 1
      Battery negative (-) → 2
      Motor gear rotates counterclockwise

      If the result is not as specified, replace the power seat motor assembly (for Reclining).
      Text in Illustration 
      *1
      Motor Gear
      *a
      Counterclockwise
      *b
      Clockwise
      *c
      Component without harness connected
      (Power Seat Motor Assembly)


INSPECT SEPARATE TYPE FRONT SEATBACK ASSEMBLY (w/ Front Seat Side Airbag)

  1. for RHD:
    Check the operation of the separate type front seatback assembly (reclining motor).

    1. Temporarily install the separate type front seatback assembly to the separate type front seat cushion assembly with the 4 bolts.

    2. B284741E01
      Apply battery voltage to the separate type front seatback assembly (reclining motor).

    3. Check that the separate type front seatback assembly moves smoothly as follows.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 2
      Battery negative (-) → 1
      Forward
      Battery positive (+) → 1
      Battery negative (-) → 2
      Backward

      If the result is not as specified, replace the separate type front seatback assembly.
      Text in Illustration 
      *a
      Component without harness connected
      (Separate Type Front Seatback Assembly (Reclining Motor))
      V100135
      Forward
      V100136
      Backward

  1. for LHD:
    Check the operation of the separate type front seatback assembly (reclining motor).

    1. Temporarily install the separate type front seatback assembly to the separate type front seat cushion assembly with the 4 bolts.

    2. B284740E01
      Apply battery voltage to the separate type front seatback assembly (reclining motor).

    3. Check that the separate type front seatback assembly moves smoothly as follows.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 2
      Battery negative (-) → 1
      Forward
      Battery positive (+) → 1
      Battery negative (-) → 2
      Backward

      If the result is not as specified, replace the separate type front seatback assembly.
      Text in Illustration 
      *a
      Component without harness connected
      (Separate Type Front Seatback Assembly (Reclining Motor))
      V100135
      Forward
      V100136
      Backward

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →