2014 Hilux · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT POWER SEAT MOTOR ASSEMBLY (for Rear Lifter)

  1. for RHD:
    Check the operation of the power seat motor assembly.

    1. B206438E02
      Apply battery voltage to the power seat motor assembly.

    2. Check that the adjust screw rotates smoothly as follows.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Adjust screw rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Adjust screw rotates counterclockwise

      If the result is not as specified, replace the power seat motor assembly.
      Text in Illustration 
      *1
      Adjust Screw
      *a
      Counterclockwise
      *b
      Clockwise
      *c
      Component without harness connected
      (Power Seat Motor Assembly)

  1. for LHD:
    Check the operation of the power seat motor assembly.

    1. B211411E02
      Apply battery voltage to the power seat motor assembly.

    2. Check that the adjust screw rotates smoothly as follows.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Adjust screw rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Adjust screw rotates counterclockwise

      If the result is not as specified, replace the power seat motor assembly.
      Text in Illustration 
      *1
      Adjust Screw
      *a
      Counterclockwise
      *b
      Clockwise
      *c
      Component without harness connected
      (Power Seat Motor Assembly)

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →