2014 Hilux · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Jun 2011


CHECK BRAKE CYLINDER AND PISTON
  1. Check the cylinder bore and pistons for rust or scoring.
    If necessary, replace the cylinder and pistons.


CHECK PAD LINING THICKNESS

F042679
  1. Using a ruler, measure the pad lining thickness.

    Standard thickness:
    11.5 mm (0.453 in.)

    Minimum thickness:
    1.0 mm (0.0394 in.)

    If the pad lining thickness is less than the minimum, replace the pad.


CHECK DISC THICKNESS
  1. Using a micrometer, measure the disc thickness.

    Standard Thickness:
    Item
    Specified Condition
    for 15 inch Front Disc Brake
    25.0 mm (0.984 in.)
    for 16 inch Front Disc Brake
    28.0 mm (1.102 in.)

    Minimum Thickness:
    Item
    Specified Condition
    for 15 inch Front Disc Brake
    23.0 mm (0.906 in.)
    for 16 inch Front Disc Brake
    26.0 mm (1.024 in.)

    If the disc thickness is less than the minimum, replace the disc.

← DISASSEMBLY (from Jun 2011)REASSEMBLY (from Jun 2011) →