INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type) |
Install the No. 2 radio bracket to the radio and display receiver assembly with the 3 screws.
| 2. INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type) |
Install the No. 2 radio bracket to the radio receiver assembly with the 3 screws.
| 3. INSTALL NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type) |
Install the No. 1 radio bracket to the radio and display receiver assembly with the 3 screws.
| 4. INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type) |
Install the No. 1 radio bracket to the radio receiver assembly with the 3 screws.
| 5. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type) |
Connect all the connectors.
Attach the wire harness clamp.
Insert the radio receiver assembly with bracket to attach the 2 clips on its backside.
- NOTICE:
- When inserting the radio receiver assembly, do not press the knobs on it.
Install the radio receiver assembly with bracket with the 4 screws.
| 6. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type) |
Connect all the connectors.
Attach the wire harness clamp.
Insert the radio and display receiver assembly with bracket to attach the 2 clips on its backside.
- NOTICE:
- When inserting the radio and display receiver assembly, do not press the knobs on it.
Install the radio and display receiver assembly with bracket with the 4 screws.
| 7. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
for Manual Air Conditioning System:
Connect the connectors.
Attach the 4 claws to connect the air conditioner control.
Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.
for Automatic Air Conditioning System:
Connect the connectors.
Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
