2014 Hilux · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL NO. 2 RADIO RECEIVER BRACKET (for Radio and Display Type)

  1. E225135
    Install the No. 2 radio bracket to the radio receiver with the 3 screws.


2. INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type)

  1. E225134
    Install the No. 2 radio bracket to the radio receiver with the 3 screws.


3. INSTALL NO. 2 RADIO BRACKET (w/ Cassette Tape Player)

  1. E232899
    Install the No. 2 radio bracket and radio receiver panel LH to the radio receiver with the 3 screws.


4. INSTALL NO. 1 RADIO RECEIVER BRACKET (for Radio and Display Type)

  1. E225133
    Install the No. 1 radio bracket to the radio receiver with the 3 screws.


5. INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type)

  1. E225132
    Install the No. 1 radio bracket to the radio receiver with the 3 screws.


6. INSTALL NO. 1 RADIO BRACKET (w/ Cassette Tape Player)

  1. E232898
    Install the No. 1 radio bracket and radio receiver panel RH to the radio receiver with the 3 screws.


7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

  1. w/ CD Player:

    1. E225130
      Connect all the connectors.

    2. Install the radio receiver assembly with bracket with the 4 screws.

  1. w/ Cassette Tape Player:

    1. E232897
      Connect all the connectors.

    2. Install the radio receiver assembly with bracket with the 4 screws.


8. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

  1. E225131
    Connect all the connectors.

  1. Install the radio receiver assembly with bracket with the 4 screws.


9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
  1. for Manual Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 4 claws to connect the air conditioner control.

    3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.


10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← REMOVAL (from Aug 2013)INSTALLATION (Aug 2012 – Jul 2013) →