REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE RADIATOR GRILLE |
Put protective tape around the radiator grille.

Text in Illustration *1
Protective Tape
Remove the 2 clips and 2 screws.
Detach the 6 claws and remove the radiator grille.

| 2. REMOVE FRONT BUMPER COVER |
Remove the 3 clips and 6 screws.

Put protective tape around the front bumper cover.

Text in Illustration *1
Protective Tape
Remove the 2 bolts, 2 screws and 5 clips.
w/ Fog Light:
Disconnect the 2 fog light connectors.
w/ Headlight Cleaner System:
Disconnect the No. 1 headlight cleaner hose.
Detach the 6 claws and remove the front bumper cover.

| 3. DRAIN WASHER FLUID |
Disconnect the washer hose from the windshield washer motor and pump assembly, and then drain the washer fluid.
| 4. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY |
Disconnect the connector.

Pull out the headlight cleaner motor and pump assembly in the direction indicated by the arrow in the illustration to remove it.

