2014 Hilux · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jun 2011


1. INSTALL NO. 1 HEADLIGHT CLEANER HOSE
  1. Attach the 3 clamps to install the No. 1 headlight cleaner hose to the front bumper cover.


2. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH
  1. Attach the 2 claws to install the headlight washer actuator sub-assembly LH with the bolt.

    Torque:
    1.1 N*m{ 11 kgf*cm , 10 in.*lbf }

  1. Connect the headlight cleaner hose.


3. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.


4. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH

  1. E229389
    Attach the 2 claws to install the type 1 headlight washer nozzle sub-assembly LH.


5. INSTALL TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.


6. INSTALL FRONT BUMPER COVER
  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. w/ Headlight Cleaner System:
    Connect the No. 1 headlight cleaner hose.

  1. Attach the 6 claws to install the front bumper cover.

  1. Install the 5 clips, 2 bolts and 2 screws.

  1. Install the 3 clips and 6 screws.


7. INSTALL RADIATOR GRILLE
  1. Attach the 6 claws to install the radiator grille.

  1. Install the 2 screws and 2 clips.

← REMOVAL (from Jun 2011)COMPONENTS (from Jun 2011) →