REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE RADIATOR GRILLE |
Put protective tape around the radiator grille.

Text in Illustration *1
Protective Tape
Remove the 2 clips and 2 screws.
Detach the 6 claws and remove the radiator grille.

| 2. REMOVE FRONT BUMPER COVER |
Remove the 3 clips and 6 screws.

Put protective tape around the front bumper cover.

Text in Illustration *1
Protective Tape
Remove the 2 bolts, 2 screws and 5 clips.
w/ Fog Light:
Disconnect the 2 fog light connectors.
w/ Headlight Cleaner System:
Disconnect the No. 1 headlight cleaner hose.
Detach the 6 claws and remove the front bumper cover.

| 3. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 4. REMOVE TYPE 1 HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH |
Extend the headlight washer nozzle by hand.

- NOTICE:
- Be careful not to damage the headlight washer actuator sub-assembly or headlight washer nozzle sub-assembly LH.
Detach the 2 claws and remove the type 1 headlight washer nozzle sub-assembly LH.

| 5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH |
Disconnect the washer hose.

Remove the bolt.
Detach the 2 claws and remove the headlight washer actuator sub-assembly LH.

| 6. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH |
- HINT:
- Use the same procedure described for the LH side.
| 7. REMOVE NO. 1 HEADLIGHT CLEANER HOSE |
Detach the 3 clamps and remove the No. 1 headlight cleaner hose from the front bumper cover.

