2014 Hilux · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Single Cab)

  1. B208915
    Attach the 2 claws to install the antenna with holder.

  1. Install the nut.

    Torque:
    4.5 N*m{ 45 kgf*cm , 39 in.*lbf }

  1. Attach the 3 clamps.

    NOTICE:
    Make sure the cable of the antenna passes behind pin A.

  1. Connect the connector.

    E232112E01


2. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Double Cab)

  1. B208915
    Attach the 2 claws to install the antenna with holder.

  1. Install the nut.

    Torque:
    4.5 N*m{ 45 kgf*cm , 39 in.*lbf }

  1. Attach the 3 clamps.

    NOTICE:
    Make sure the cable of the antenna passes behind pin A.

  1. Connect the connector.

    E225601E01


3. INSTALL ROOF HEADLINING ASSEMBLY
  1. for Double Cab:
    (Click here)

  1. for Single Cab:
    (Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2012 – Jul 2013)COMPONENTS (from Jun 2011) →