INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Single Cab) |
Attach the 2 claws to install the antenna with holder.

Install the nut.
- Torque:
- 4.5 N*m{ 45 kgf*cm , 39 in.*lbf }
Attach the 3 clamps.
- NOTICE:
- Make sure the cable of the antenna passes behind pin A.
Connect the connector.


| 2. INSTALL ANTENNA WITH HOLDER ASSEMBLY (for Double Cab) |
Attach the 2 claws to install the antenna with holder.

Install the nut.
- Torque:
- 4.5 N*m{ 45 kgf*cm , 39 in.*lbf }
Attach the 3 clamps.
- NOTICE:
- Make sure the cable of the antenna passes behind pin A.
Connect the connector.


| 3. INSTALL ROOF HEADLINING ASSEMBLY |
for Double Cab:
(Click here)
for Single Cab:
(Click here)
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
