2014 Hilux · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

  1. E229140E01
    Apply battery voltage to the connector and check the blub illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Side turn signal light assembly LH comes on

    If the result is not as specified, replace the side turn signal light assembly LH.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly LH)


INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

  1. E229140E01
    Apply battery voltage to the connector and check the blub illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → 1
    Battery negative (-) → 2
    Side turn signal light assembly RH comes on

    If the result is not as specified, replace the side turn signal light assembly RH.
    Text in Illustration 
    *a
    Component without harness connected
    (Side Turn Signal Light Assembly RH)

← REMOVAL (from Jun 2011)INSTALLATION (from Jun 2011) →