2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE FRONT EXHAUST PIPE ASSEMBLY
(Click here)

2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

A253518

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.


3. REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

A254000

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Detach the 5 clamps.

  1. Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.


4. REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

A253520

NOTICE:
If the sensor is dropped, replace it with a new one.

  1. Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.

← COMPONENTS (from Jun 2011)INSPECTION (from Jun 2011) →