REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1.
REMOVE FRONT EXHAUST PIPE ASSEMBLY |
 |
(Click here)
| 2.
REMOVE EXHAUST GAS TEMPERATURE SENSOR |
 |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.
| 3.
REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR |
 |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Detach the 5 clamps.
Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.
| 4.
REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR |
 |
- NOTICE:
- If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.