CB-10 System Microcomputer Malfunction
Diagnostic trouble codes · Vehicles built Aug 2012 – Jul 2013
Also covers:
- CB-11 Media Interface Microcomputer Malfunction
- CB-12 CD-LSI Malfunction
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013
DESCRIPTION
| DTC Code |
DTC Detection Condition |
Trouble Area |
| CB-10 |
A system microcomputer malfunction. |
|
| CB-11 |
A media interface microcomputer malfunction. |
|
| CB-12 |
A CD-LSI (large scale integration) malfunction. |
INSPECTION PROCEDURE
- NOTICE:
- The data stored on the USB device or "iPod" may be changed or lost due to malfunctions, repairs, system errors, etc. Therefore, when repairs are to be performed, explain this to the customer and obtain their consent prior to performing repairs.
- HINT:
- After the inspection is completed, clear the DTCs.
| 1. REPLACE USB DEVICE OR "iPod" |
Disconnect the USB device or "iPod" from the stereo jack adapter.
Turn the ignition switch off.
- HINT:
- When one of these DTCs has been stored, it is necessary to turn off the ignition switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the ignition switch to ACC.
Connect a known good USB device or "iPod" to the stereo jack adapter.
| NEXT | |
| 2. CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs and check if the same DTC occurs again.
- HINT:
- If DTCs are output frequently, replace the radio receiver assembly.
- OK:
- Malfunction disappears.
|
|
||||
| OK | ||
| ||
