2014 Hilux · Service Manual BODY ELECTRICAL

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
Use these procedures to troubleshoot the rear view monitor system.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      If the voltage is below 11 V, replace or recharge the battery before proceeding.
    NEXT

    3.CUSTOMER PROBLEM ANALYSIS
      NEXT

      4.PROBLEM SYMPTOM CONFIRMATION
        NEXT

        5.PROBLEM SYMPTOMS TABLE
        1. Refer to Problem Symptoms Table (Click here).

          Result 
          Result
          Proceed to
          Fault is not listed in problem symptoms table
          A
          Fault is listed in problem symptoms table
          B


        B.
        A

        6.OVERALL ANALYSIS AND TROUBLESHOOTING
        1. Terminals of ECU (Click here).

        NEXT

        7.ADJUST, REPAIR OR REPLACE
          NEXT

          8.CONFIRMATION TEST
            NEXT

            ← SYSTEM DESCRIPTION (from Jun 2011)HOW TO PROCEED WITH TROUBLESHOOTING (Aug 2012 – Jul 2013) →