SYSTEM DESCRIPTION
Troubleshooting · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
| DISC PLAYER OUTLINE |
A disc player uses a laser pickup to read digital signals recorded on a disc. By converting the digital signals to analog, it can play music, video and audio.
- CAUTION:
- Do not look directly at the laser pickup because the disc player uses an invisible laser beam. Be sure to operate the player only as instructed.
- NOTICE:
- Do not disassemble any part of the disc player.
- Do not apply oil to the disc player.
- Do not insert anything but a disc into the disc player.
- Do not disassemble any part of the disc player.
This player can play only audio CDs, CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) that have any of the following marks:


This player can play only DVD videos that have any of the following marks:


The following products may not be playable on your player.
- SACD
- dts CD
- Copy-protected CD
- Super Video CD
- DVD audio
- DVD-RAM
- SACD
Precautions for use of discs
- NOTICE:
- CD-Rs and CD-RWs may not be played depending on the recording conditions or characteristics of the discs, or due to damage, dirt or deterioration caused by leaving the discs in the cabin for a long time.
- Unfinalized CD-Rs and CD-RWs cannot be played.
- CD-Rs and CD-RWs are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not play.
- If there are fingerprints or scratches on a disc, the disc may not play or the disc may skip.
- Some CD-Rs and CD-RWs may deteriorate if they are left in the cabin for a long time.
- Keep CD-Rs and CD-RWs in an opaque case.
- SECAM color television standard discs cannot be played.
- DualDiscs that mate DVD recorded material on one side with CD digital audio material on the other cannot be played.
- Keep the discs away from dirt. Be careful not to damage the discs or leave fingerprints on them.
- Hold discs by the outer edge and center hole with the label side up.
- Leaving the disc exposed halfway out of the slot for a long time after pressing the disc eject button may cause deformation of the disc, making the disc unusable.
- If discs have adhesive tape, stickers, disc labels or any traces of such labels attached, the discs may not be ejected or player malfunctions may result.
- Keep the discs away from direct sunlight. (Exposure to direct sunlight may cause deformation of the disc, making the disc unusable.)
- Do not use odd-shaped disc because these may cause player malfunctions.
- Do not use discs whose recording portion is transparent or translucent because they may not be inserted, ejected or played normally.
- Use only 4.7 in. (12 cm) disc.
- Do not use 3 in. (8 cm) CDs either with or without adaptors.
- CD-Rs and CD-RWs may not be played depending on the recording conditions or characteristics of the discs, or due to damage, dirt or deterioration caused by leaving the discs in the cabin for a long time.
- HINT:
- When it is cold or it is raining, if the windows mist up, mist and condensation may form in the player. In such cases, the CD may skip or stop in the middle of play. Ventilate or dehumidify the cabin for a while before using the player.
- The CD may skip if the player experiences strong vibrations when the vehicle is driven on rough roads or similar uneven surfaces.
- When it is cold or it is raining, if the windows mist up, mist and condensation may form in the player. In such cases, the CD may skip or stop in the middle of play. Ventilate or dehumidify the cabin for a while before using the player.
Cleaning

- NOTICE:
- Do not use a lens cleaner because it may cause a malfunction in the pickup portion of the player.
If dirt is on the disc surface, wipe it clean with a soft dry cloth such as an eyeglass cleaner for plastic lenses from the inside to the outside in a radial direction.
- NOTICE:
- Pressing on the disc by hand or rubbing the disc with a hard cloth may scratch the disc surface.
- Use of solvents such as record spray, antistatic agents, alcohol, benzine, thinners or a chemical cloth may cause damage to the disc, making the disc unusable.
- Pressing on the disc by hand or rubbing the disc with a hard cloth may scratch the disc surface.
| MP3/WMA/AAC OUTLINE |
Playable MP3 file standards
Compatible standard
MPEG1 LAYER3, MPEG2 LSF LAYER3
Compatible sampling frequency
- MPEG1 LAYER3: 32, 44.1, 48 (kHz)
- MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)
Compatible bit rate
- MPEG1 LAYER3: 32 to 320 (kbps)
- MPEG2 LSF LAYER3: 8 to 160 (kbps)
- Compatible with VBR
Compatible channel mode
Stereo, joint stereo, dual channel, monaural
- MPEG1 LAYER3: 32, 44.1, 48 (kHz)
Playable WMA file standards
Compatible standard
WMA Ver. 7, 8 and 9
Compatible sampling frequency
32, 44.1, 48 (kHz)
Compatible bit rate (Only compatible with 2-channel playback)
- Ver. 7, 8: CBR48 to 192 (kbps)
- Ver. 9: CBR48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)
- Compatible with VBR
- Ver. 7, 8: CBR48 to 192 (kbps)
Playable AAC file standards
Compatible standard
MPEG4/AAC-LC
Compatible sampling frequency
11.025, 16, 22.05, 24, 32, 44.1, 48 (kHz)
Compatible bit rate (Only compatible with 2-channel playback)
- 16 to 320 (kbps)
- Compatible with VBR
- 16 to 320 (kbps)
ID3 tag, WMA tag and AAC tag
Additional text information called an ID3 tag can be input to MP3 files. Information such as song titles and artist names can be stored.
- HINT:
- This player is compatible with ID3 tags of ID3 Ver. 1.0 and 1.1, and ID3 Ver. 2.2 and 2.3. (Number of characters complies with ID3 Ver. 1.0 and 1.1.)
Additional text information called a WMA tag can be input to WMA files. Information such as song titles and artist names can be stored.
Additional text information called an AAC tag can be input to AAC files. Information such as song titles and artist names can be stored.
Usable media
Only CD-ROMs, CD-Rs (CD-Recordable), CD-RWs (CD-ReWritable) and USB devices can be used to play MP3/WMA/AAC files.
- NOTICE:
- CD-Rs and CD-RWs are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not be played.
- If there are fingerprints or scratches on a disc, the disc may not be played or the CD may skip.
- Some CD-Rs and CD-RWs may deteriorate if they are left in the cabin for a long time.
- Keep CD-Rs and CD-RWs in an opaque case.
- CD-Rs and CD-RWs are more easily affected by a hot and humid environment than discs used for normal audio CDs. For this reason, some CD-Rs and CD-RWs may not be played.
Usable media format
Usable media format
Disc format
CD-ROM Mode 1, CD-ROM XA Mode 2 Form 1
File format
ISO9660 Level 1 and Level 2 (Joliet, Romeo)
- HINT:
- MP3/WMA/AAC files written in any unlisted format may not be played normally or the file names or folder names may not be displayed correctly.
- This player is compatible with multi-session discs and can play CD-Rs and CD-RWs on which MP3/WMA/AAC files have been added. However, only the first session can be played.
- Discs whose first session includes both music data and MP3, WMA and AAC format data may not be played.
- MP3/WMA/AAC files written in any unlisted format may not be played normally or the file names or folder names may not be displayed correctly.
Standards and restrictions
Maximum directory levels
8 levels
Maximum number of characters for a folder name/file name
32 characters
Maximum number of folders
192 (Including empty folders, root folders, and folders that do not contain MP3/WMA/AAC files)
Maximum number of files in a disc
255 (Including non- MP3/WMA/AAC files)
File names
Only files with an extension of ".mp3", ".wma" and ".m4a" can be recognized and played as MP3, WMA or AAC files.
Save MP3, WMA or AAC files with an extension of ".mp3", ".wma" or ".m4a".
- NOTICE:
- If non-MP3, non-WMA or non-AAC files are saved with an extension of ".mp3", ".wma" or ".m4a", those files may be wrongly recognized as MP3, WMA or AAC files and played. A loud noise may occur and damage to the speakers may result.
| "Bluetooth" OUTLINE |


| *1 |
Cellular Phone ("Bluetooth" compatible type) |
*2 |
Radio and Display Receiver Assembly (Built-in "Bluetooth" receiver antenna) |
| *3 |
Portable Audio Player ("Bluetooth" compatible type) |
- |
- |
| *a |
Example |
*b |
Cellular Network |
| *c |
"Bluetooth" Wireless Connection |
- |
- |
"Bluetooth" is a trademark owned by Bluetooth SIG, Inc.
"Bluetooth" is a wireless connection technology that uses the 2.4 GHz frequency band.
- HINT:
- The communication performance of "Bluetooth" may vary depending on obstructions or radio wave conditions between communication devices, electromagnetic radiation, communication device sensitivity or antenna capacity.
Hands-free function
The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible cellular phone* can be connected using a "Bluetooth" wireless connection. This enables the use of the hands-free function on the cellular phone even if the phone is in a pocket or bag. For this reason, it is not necessary to use a connector or cable to connect the cellular phone.
*: Some versions of "Bluetooth" compatible cellular phones may not function.Compatible hands-free devices
Required "Bluetooth" specifications
Ver. 1.1 or higher (Ver. 2.1+EDR or higher recommended)
Compatible profiles
- HFP (Hands Free Profile) Ver. 1.0 or higher (Ver. 1.6 or higher recommended)*1
- OPP (Object Push Profile) Ver. 1.2 or higher*1
- PBAP (Phone Book Access Profile) Ver. 1.1 or higher*1
- SPP (Serial Port Profile) Ver. 1.1 or higher*2
Maximum number of hands-free devices that can be registered (including audio devices)
5
- *1: This profile is necessary when using the hands-free function.
- *2: This profile is necessary when using the T-Connect (Android MirrorLink compatible).
- HFP (Hands Free Profile) Ver. 1.0 or higher (Ver. 1.6 or higher recommended)*1
"Bluetooth" audio function
The "Bluetooth" built-in radio and display receiver assembly and a "Bluetooth" compatible portable audio player* can be connected using a "Bluetooth" wireless connection. This enables files stored in the portable audio player to be heard from the vehicle speakers. In addition, operations such as play/stop can be performed directly from the radio and display receiver assembly.
*: Some versions of "Bluetooth" compatible audio players may not be able to operate the "Bluetooth" function, or music may play, but functions available using the radio and display receiver assembly may be limited.Compatible "Bluetooth" audio devices
"Bluetooth" specifications
Ver. 1.1 or higher (Ver. 2.1+EDR or higher recommended)
Following profiles
- A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)
- AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.4 or higher recommended)
Maximum number of audio devices that can be registered (including hands-free device)
5
- A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher (Ver. 1.2 or higher recommended)
| RADIO DESCRIPTION |
Radio frequency band
Radio broadcasts use the radio frequency bands shown in the table below.


Service area
The service areas of AM and FM broadcasts are vastly different. Sometimes an AM broadcast can be received very clearly but an FM stereo broadcast cannot. FM stereo has the smallest service area, and is prone to pick up static and other types of interference such as noise.

Text in Illustration *a
FM (Stereo)
*b
FM (Monaural)
*c
AM
Radio reception problems
- HINT:
- In addition to static, other problems such as "phasing", "multipath" and "fade out" exist. These problems are not caused by electrical noise, but by the radio signal propagation method itself.
Phasing

AM broadcasts are susceptible to electrical interference and another kind of interference called phasing. Occurring only at night, phasing is the interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off the ionosphere and the other signal is received directly from the transmitter.Text in Illustration *a
Phasing
*b
Ionosphere
Multipath

Multipath is a type of interference created when a vehicle receives 2 radio wave signals from the same transmitter. One signal is reflected off buildings or mountains and the other signal is received directly from the transmitter.Text in Illustration *a
Multipath
Fade out

Fade out is caused by objects (buildings, mountains and other such large obstacles) that deflect away part of a signal, resulting in a weaker signal when the object is between the transmitter and vehicle. High frequency radio waves, such as FM broadcasts, are easily deflected by obstructions. Low frequency radio waves, such as AM broadcasts, are less likely to deflect.Text in Illustration *a
Fade Out
Noise problem
Technicians must have a clear understanding about each customer's noise complaint. Use the following table to diagnose noise problems.Radio Frequency
Noise Occurrence Condition
Presumable Cause
AM
Noise occurs in a specific area
Foreign noise
Noise occurs when listening to an intermittent broadcast
An identical program transmitted from multiple towers can cause noise where the signals overlap
Noise occurs only at night
Signal phasing
FM
Noise occurs while driving in a specified area
Multipath resulting from a change in FM frequency
| USB AUDIO SYSTEM FUNCTION OUTLINE |
The stereo jack adapter on radio and display receiver assembly is equipped with a USB terminal. Connecting a USB device or "iPod" to the No. 1 stereo jack adapter assembly allows music files to be played. Not only is it possible to play music from a USB device with audio functions, it is also possible to play MP3, WMA or AAC music files that are stored on a USB device. In addition, "iPod" control software is installed, allowing file selection from playlists and operation using shuffle mode.
- HINT:
- Operation through the controls of a USB device or "iPod" cannot be performed while it is connected.
USB audio system compatible model
USB device
The following device formats can be used:
MP3, WMA and AAC files written to a USB device with any format other than those listed above may not play correctly, and their names and folder names may not be displayed correctly. Items related to standards and limitations are as follows:Compatible USB device formats
- USB communication format: USB 2.0 HS (480 Mbps) and FS (12 Mbps)
- File format: FAT16/32 (Windows)
- Class: Mass storage class
- Maximum directory hierarchy: 8 levels
- Maximum number of folders in device: 3000 (including the root folder)
- Maximum number of files in device: 9999
- Maximum number of files per folder: 255
- USB communication format: USB 2.0 HS (480 Mbps) and FS (12 Mbps)
"iPod"
""iPhone", "iPod", "iPod classic", "iPod nano" and "iPod touch" are trademarks of Apple Inc., registered in the U.S. and other countries.
The following "iPod", "iPod nano", "iPod classic", "iPod touch" and "iPhone" devices can be used with this system.
Made for- "iPod touch" (5th generation)
- "iPod touch" (4th generation)
- "iPod touch" (3rd generation)
- "iPod touch" (2nd generation)
- "iPod touch" (1st generation)
- "iPod classic"
- "iPod with video"
- "iPod nano" (7th generation)
- "iPod nano" (6th generation)
- "iPod nano" (5th generation)
- "iPod nano" (4th generation)
- "iPod nano" (3rd generation)
- "iPod nano" (2nd generation)
- "iPod nano" (1st generation)
- "iPhone 5"
- "iPhone 4S"
- "iPhone 4"
- "iPhone 3GS"
- "iPhone 3G"
- "iPhone"
- HINT:
- Depending on differences between models or software versions etc., some models might be incompatible with this system.
- "iPod touch" (5th generation), "iPod nano" (7th generation) and "iPhone 5" screens cannot be displayed in iPod-video mode on the radio and display receiver assembly.
- Depending on differences between models or software versions etc., some models might be incompatible with this system.
- "iPod touch" (5th generation)
| AUTOMATIC SOUND LEVELIZER (ASL) FUNCTION OUTLINE |
The Automatic Sound Levelizer (ASL) function automatically adjusts the audio system volume level in order to compensate for increased vehicle noise (vehicle noise tends to increase as vehicle speed increases). The ASL adjusts the volume level based upon vehicle speed signals that it receives from the combination meter assembly.
| DIAGNOSTIC FUNCTION OUTLINE |
The audio and display system has a diagnostic function (the result is indicated on the master unit).
| T-Connect OUTLINE |
By connecting the "iPhone" or smartphone (Android ["MirrorLink" compatible]) to the vehicle, the T-Connect enables control of various services using a special application from a "iPhone" or compatible smartphone. The system details are as follows:
Compatible smartphones
- "iPhone 4"
- "iPhone 4S"
- Android ("MirrorLink" compatible) (Nokia)
- Android ("MirrorLink" compatible) (Samsung)
- HINT:
- Applications may be subject to fees.
- Some applications have a display restriction in consideration of safe driving.
- Applications may be subject to fees.
- "iPhone 4"
Connection procedure
- When using an "iPhone":
- Turn on the "iPhone".
- Open the USB/AUX cover, and then connect the "iPhone" to the USB and AUX ports using the special connection cable.
- When using smartphone (Android ["MirrorLink" compatible]):
- Turn on the smartphone (Android ["MirrorLink" compatible]).
- Connect the smartphone (Android ["MirrorLink" compatible]) and radio and display receiver assembly using "Bluetooth".
- Open the USB/AUX cover, and then connect the smartphone (Android ["MirrorLink" compatible]) to the USB port using the USB cable that comes with the smartphone (Android ["MirrorLink" compatible]).
- When using an "iPhone":
System description


Text in Illustration *1
"iPhone"
*2
Smartphone (Android ["MirrorLink" compatible])
*3
Radio and Display Receiver Assembly
-
-
*a
Example
*b
Cellular Network
*c
HTTPS
*d
Global Data Center
*e
Toyota Smart Center
*f
Internet
*g
USB Communication Line
(Voice Signal, Vehicle Information, Operation Information)
*h
AUX Connection Line
(Image Signal)
*i
USB Communication Line
(Voice Signal, Image Signal, Operation Information)
*j
"Bluetooth" Wireless Connection
(Vehicle Information)
| Toyota Link FUNCTION OUTLINE |
Enables the usable content of a cellular phone to be displayed on and operated from the radio and display receiver assembly screen. As "Bluetooth" communication is used for the communication between a cellular phone and the radio and display receiver assembly, before using the Toyota Link function on the audio and visual system, the cellular phone needs to be registered with the audio and visual system as a "Bluetooth" device. For details regarding Toyota Link, applications and compatible phones, refer to New Car Features.