2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL INJECTOR DRIVER BRACKET
  1. Install the injector driver bracket with the 4 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }


2. INSTALL INJECTOR DRIVER ASSEMBLY
  1. for LHD:

    1. Install the injector driver assembly with the 2 bolts.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Connect the 4 connectors.

  1. for RHD:

    1. Install the injector driver assembly with the 3 bolts.

      Torque:
      8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

    2. Connect the 4 connectors and attach the wire harness clamp.


3. INSTALL GLOW PLUG CONTROLLER (for LHD)
(Click here)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Jun 2011 – Jul 2012)INSTALLATION (from Aug 2013) →