INSTALLATION
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. INSTALL INJECTOR DRIVER BRACKET |
Install the injector driver bracket with the 4 screws.
- Torque:
- 2.0 N*m{ 20 kgf*cm , 18 in.*lbf }
| 2. INSTALL INJECTOR DRIVER ASSEMBLY |
for LHD:
Install the injector driver assembly with the 2 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the 4 connectors.
for RHD:
Install the injector driver assembly with the 3 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the 4 connectors and attach the wire harness clamp.
| 3. INSTALL GLOW PLUG CONTROLLER (for LHD) |
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
