2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

REMOVAL

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)

4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)

5. REMOVE NO. 1 HEATER RELAY

E226124
  1. Remove the 2 nuts.

  1. Detach the clamp and disconnect the driver side junction block.

  1. E226175
    Remove the No. 1 heater relay.

← REMOVAL (Aug 2012 – Jul 2013)INSPECTION (from Jun 2011) →