REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
 |
(Click here)
| 2.
REMOVE AUTO CLOCK HOLE BEZEL |
 |
Remove the 2 screws.
Disconnect the connector and remove the auto clock hole bezel.
| 3.
REMOVE ACCESSORY METER ASSEMBLY |
 |
Remove the 2 screws.
- Using a screwdriver, detach the 3 claws and remove the accessory meter.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration
*1
|
Protective Tape
|