2014 Hilux · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)

2. REMOVE AUTO CLOCK HOLE BEZEL

B277291
  1. Remove the 2 screws.

  1. Disconnect the connector and remove the auto clock hole bezel.


3. REMOVE CLOCK ASSEMBLY

B277292E01
  1. Using a screwdriver, detach the 6 claws and remove the clock.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

← COMPONENTS (from Jun 2011)REMOVAL (Aug 2012 – Jul 2013) →