REMOVAL
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
| 2. REMOVE AUTO CLOCK HOLE BEZEL |
![]() ![]() |
Remove the 2 screws.
Disconnect the connector and remove the auto clock hole bezel.
| 3. REMOVE CLOCK ASSEMBLY |
![]() ![]() |
Using a screwdriver, detach the 6 claws and remove the clock.
- HINT:
- Tape the screwdriver tip before use.
Text in Illustration *1
Protective Tape



