2014 Hilux · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built from Jun 2011

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL NO. 1 ROOF WIRE

B278283E01
  1. Position the positioning tape as shown in the illustration and install the No. 1 roof wire.

  1. Apply tape in the order shown in the illustration to fix the No. 1 roof wire in place.

    HINT:
    Adjust any slack of the No. 1 roof wire as indicated by the dashed lines in the illustration and apply tape.

    Text in Illustration 
    *1
    Positioning Tape


2. INSTALL ROOF HEADLINING PACKING

B276989E01

HINT:
Use the same procedure for both roof headlining packings.

  1. Align a new roof headlining packing with the markings on the roof headlining and install the roof headlining packing to the positions shown in the illustration using double-sided tape.

    Text in Illustration 
    *1
    Roof Headlining Packing
    *2
    Marking

← DISASSEMBLY (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →