DISASSEMBLY
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE TELEPHONE MICROPHONE ASSEMBLY (w/ Microphone) |
except Single Cab:
Detach the 2 claws and disconnect the connector.

Detach the 2 claws and remove the telephone microphone assembly.
for Single Cab:
Disconnect the connector and detach the clamp.

Detach the 2 claws and remove the telephone microphone assembly.
| 2. REMOVE ROOF HEADLINING HOLDER COVER (w/ Microphone) |
![]() ![]() |
Detach the 4 claws and remove the roof headlining holder cover and No. 1 roof headlining trim cover assembly.
Text in Illustration *1
Roof Headlining Holder Cover
*2
No. 1 Roof Headlining Trim Cover Assembly
| 3. REMOVE NO. 1 ROOF WIRE |
![]() ![]() |
w/o Microphone:
Remove each piece of tape and the No. 1 roof wire from the roof headlining assembly.
w/ Microphone:

Remove each piece of tape and the No. 1 roof wire from the roof headlining assembly.


