REASSEMBLY
Removal / installation · Vehicles built Jun 2011 – Jul 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. INSTALL NO. 1 ROOF WIRE |
![]() ![]() |
Position the positioning tape as shown in the illustration and install the No. 1 roof wire.
Apply tape in the order shown in the illustration to fix the No. 1 roof wire in place.


