2014 Hilux · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Aug 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. INSTALL NO. 1 COOLER WIRE

  1. B280828E01
    Install the No. 1 cooler wire to the air conditioning amplifier assembly as shown in the illustration.
    Text in Illustration 
    *1
    Air Conditioning Amplifier Assembly
    *2
    No. 1 Cooler Wire


2. INSTALL HEATER CONTROL BASE
  1. Attach the 4 claws to install the heater control base.


3. CONNECT NO. 1 COOLER WIRE

  1. B280829
    Connect the connector as shown in the illustration.


4. INSTALL LOWER HEATER CONTROL BASE
  1. Attach the 3 claws to the lower heater control base.

  1. Install the 4 screws.

  1. Install the 4 screws.


5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
  1. for Manual Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 4 claws to connect the air conditioner control.

    3. Attach the 10 claws and 4 clips to install the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. Connect the connectors.

    2. Attach the 8 claws and 4 clips to install the center instrument cluster finish panel.


6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Aug 2012 – Jul 2013)COMPONENTS (from Jun 2011) →