2014 Hilux · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT NO. 1 COOLER WIRE

  1. Measure the resistance according to the value(s) in the table below.

    B276029E01

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A1-B1
    Always
    Below 1 Ω
    A2-B2
    Always
    Below 1 Ω
    A3-B3
    Always
    Below 1 Ω
    A4-B4
    Always
    Below 1 Ω
    A5-B5
    Always
    Below 1 Ω
    A6-B6
    Always
    Below 1 Ω
    A7-B7
    Always
    Below 1 Ω
    A8-B8
    Always
    Below 1 Ω
    A9-B9
    Always
    Below 1 Ω
    A10-B10
    Always
    Below 1 Ω
    A11-B11
    Always
    Below 1 Ω
    A12-B12
    Always
    Below 1 Ω
    A13-B13
    Always
    Below 1 Ω
    A14-B14
    Always
    Below 1 Ω
    A15-B15
    Always
    Below 1 Ω

    If the result is not as specified, replace the No. 1 cooler wire.

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →