2014 Hilux · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

  1. for Manual Air Conditioning System:

    1. B278367E01
      Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 10 claws and 4 clips.

    3. B278366
      Detach the 4 claws and disconnect the air conditioner control.

    4. Disconnect the connectors and remove the center instrument cluster finish panel.

  1. for Automatic Air Conditioning System:

    1. B278368E01
      Put protective tape around the center instrument cluster finish panel.
      Text in Illustration 
      *1
      Protective Tape

    2. Using a moulding remover, detach the 8 claws and 4 clips.

    3. Disconnect the connectors and remove the center instrument cluster finish panel.


4. REMOVE LOWER HEATER CONTROL BASE

  1. E228137
    Remove the 4 screws.

  1. E228138
    Remove the 4 screws.

  1. Detach the 3 claws and disconnect the lower heater control base.


5. DISCONNECT NO. 1 COOLER WIRE

  1. B280826
    Disconnect the No. 1 cooler wire from the air conditioning amplifier assembly as shown in the illustration.


6. REMOVE HEATER CONTROL BASE

  1. E117019
    Detach the 4 claws and remove the heater control base.


7. REMOVE NO. 1 COOLER WIRE

  1. B280827E01
    Remove the No. 1 cooler wire from the air conditioning amplifier assembly as shown in the illustration.
    Text in Illustration 
    *1
    Air Conditioning Amplifier Assembly
    *2
    No. 1 Cooler Wire

← REMOVAL (Jun 2011 – Jul 2012)REMOVAL (from Aug 2013) →