ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT HOOD SUB-ASSEMBLY |
Check that the clearance measurements of areas A to D are within the standard ranges.


- Standard:
Area
Specified Condition
Area
Specified Condition
A (Reference)
3.5 to 6.5 mm (0.139 to 0.256 in.)
B (Reference)
-0.8 to 2.2 mm (-0.0315 to 0.0866 in.)
C
2.5 to 5.5 mm (0.0984 to 0.217 in.)
D
-1.2 to 1.8 mm (-0.0472 to 0.0709 in.)
