2014 Hilux · Service Manual BODY

ADJUSTMENT

Removal / installation · Vehicles built from Jun 2011


1. INSPECT REAR BODY TAIL GATE ASSEMBLY (for A Deck)

  1. Check that the clearance measurements of areas A to D are within the standard ranges.

    B276684E01

    Standard:
    Area
    Specified Condition
    Area
    Specified Condition
    A (Reference)
    5.8 mm (0.228 in.)
    B (Reference)
    5.8 mm (0.228 in.)
    C (Reference)
    5.8 mm (0.228 in.)
    D (Reference)
    5.8 mm (0.228 in.)


2. ADJUST REAR BODY TAIL GATE ASSEMBLY (for A Deck)
  1. Loosen the hinge bolts on the tail gate.

  1. Adjust the tail gate by moving it left and right so that the clearance measurements are within the specified ranges.

  1. Tighten the hinge bolts on the tail gate after the adjustment.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


    B276686


3. INSPECT REAR BODY TAIL GATE ASSEMBLY (for J Deck)

  1. Check that the clearance measurements of areas A to D are within the standard ranges.

    B276685E01

    Standard:
    Area
    Specified Condition
    Area
    Specified Condition
    A (Reference)
    5.3 mm (0.209 in.)
    B (Reference)
    5.3 mm (0.209 in.)
    C (Reference)
    5.8 mm (0.228 in.)
    D (Reference)
    5.8 mm (0.228 in.)


4. ADJUST REAR BODY TAIL GATE ASSEMBLY (for J Deck)
  1. Loosen the hinge bolts on the tail gate.

  1. Adjust the tail gate by moving it left and right so that the clearance measurements are within the specified ranges.

  1. Tighten the hinge bolts on the tail gate after the adjustment.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }


    B281156

← DISASSEMBLY (from Jun 2011)REASSEMBLY (from Jun 2011) →