2014 Hilux · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE TAIL GATE STAY ASSEMBLY

HINT:
Use the same procedure for both tail gate stays.

  1. B276659
    Remove the 2 screws and tail gate stay.


2. REMOVE REAR BODY TAIL GATE ASSEMBLY

  1. B276658
    w/ Wire Harness:

    1. Disconnect the connector and detach the 2 claws.

    2. Pull out the wire harness from the vehicle body.

  1. B281154
    Remove the 2 bolts and rear body tail gate.

← COMPONENTS (from Jun 2011)DISASSEMBLY (from Jun 2011) →