Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.
INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY LH
Set the front seat cushion heater on the separate type front seat cushion cover.
Using a tacker, install the front seat cushion heater to the separate type front seat cushion cover with 12 new tack pins as shown in the illustration.
NOTICE:
Do not substitute other metal parts for tack pins.
Text in Illustration
*1
Tack Pin
*2
Separate Type Front Seat Cushion Cover
*3
Front Seat Cushion Heater Assembly LH
2.
INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.
NOTICE:
Be careful not to damage the cover.
When installing the hog rings, avoid wrinkling the cover.
Text in Illustration
*1
Hog Ring Pliers
Attach the hooks to install the separate type front seat cushion cover with pad to the front seat cushion frame sub-assembly LH.
Bend the 2 front seat cushion frame claws downward.
Using hog ring pliers, attach the separate type front seat cushion cover to the front seat cushion frame sub-assembly LH with new hog rings.
Text in Illustration
*1
Hog Ring Pliers
for Front Passenger Side, w/ Seat Belt Warning System: Attach the wire harness clamp.
for LHD, w/ Seat Heater System: Attach the 3 front seat cushion heater assembly LH wire harness clamps.
3.
INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
Install the separate type front seatback assembly with the 4 bolts.
Torque:
40 N*m{
408 kgf*cm
, 30 ft.*lbf
}
for LHD, w/ Seat Heater System: Connect the front seatback heater assembly LH connector.
Using hog ring pliers, attach the separate type front seat cushion cover and rubber bands of the separate type front seatback cover to the front seat cushion frame sub-assembly LH with new hog rings.
Text in Illustration
*1
Hog Ring Pliers
Attach the 3 front seat airbag wire harness clamps.
4.
INSTALL SEATBACK SPRING LH
Install the seatback spring LH.
5.
INSTALL FRONT SEAT CUSHION SHIELD LH
Attach the guide and 2 hooks in the order shown in the illustration to install the front seat cushion shield LH.
Text in Illustration
*1
Guide
*2
Hook
Install the 2 screws.
6.
INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
Attach the claw to install the reclining adjuster release handle LH.
7.
INSTALL FRONT SEAT INNER CUSHION SHIELD LH
Attach the 2 hooks in the order shown in the illustration to install the front seat inner cushion shield LH.
Install the 2 screws.
8.
INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)