INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH |
![]() ![]() |
Check the front seat cushion heater assembly LH.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
A-2 - B-1
Seat cushion heater temperature 20°C (68°F)
7.2 to 8.8 Ω
B-1 - B-2
A-2 - B-2
Below 1 Ω
A-1 - B-1
Text in Illustration *1
Connector A
*2
Connector B
*a
Component without harness connected
(Front Seat Cushion Heater Assembly LH)
| INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH |
![]() ![]() |
Check the front seat cushion heater assembly RH.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
A-2 - B-1
Seat cushion heater temperature 20°C (68°F)
7.2 to 8.8 Ω
B-1 - B-2
A-2 - B-2
Below 1 Ω
A-1 - B-1
Text in Illustration *1
Connector A
*2
Connector B
*a
Component without harness connected
(Front Seat Cushion Heater Assembly RH)


