DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY |
Mount the brake master cylinder in a vise.
- NOTICE:
- Place aluminum plates on the vise to prevent damage to the brake master cylinder.
Using a pin punch and hammer, remove the master cylinder pin from the brake master cylinder reservoir.
Remove the brake master cylinder reservoir from the brake master cylinder.
| 2. REMOVE MASTER CYLINDER RESERVOIR GROMMET |
Remove the 2 master cylinder reservoir grommets from the master cylinder reservoir assembly.
| 3. REMOVE BRAKE FLUID INFORMATION LABEL |
| 4. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY |
Remove the brake master cylinder reservoir filler cap assembly from the brake master cylinder reservoir assembly.
| 5. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER |
Remove the brake master cylinder reservoir strainer from the brake master cylinder reservoir assembly.
