Cellular Phone Registration Failure
Circuit diagnosis · Vehicles built from Aug 2013
CAUTION / NOTICE / HINT
- HINT:
- If the operation of a cellular phone or the navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
INSPECTION PROCEDURE
| 1. CHECK USAGE CONDITION |
Check that the vehicle and cellular phone meet the following conditions:
- NOTICE:
- If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
- The cellular phone is "Bluetooth" compatible (Click here).
- "Bluetooth" setting of the cellular phone is on.
- Operating system and software of the cellular phone are the latest versions.
- There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.
- The cellular phone is "Bluetooth" compatible (Click here).
Register the cellular phone again and check if it is registered correctly.
- HINT:
- If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
- OK:
- Cellular phone can be registered.
|
|
||||
| OK | ||
| ||
| 2. RESTART CELLULAR PHONE |
Restart the cellular phone.
Turn the ignition switch off.
Turn the ignition switch to ACC.
Register the cellular phone as a connected device again and check if it is registered correctly.
- HINT:
- If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
- OK:
- Cellular phone can be registered.
|
|
||||
| OK | ||
| ||
| 3. CHECK BRING CELLULAR PHONE NEAR IN-VEHICLE DEVICE |
Place the cellular phone close to the navigation receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
- HINT:
- If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
- OK:
- Cellular phone can be registered.
|
|
||||
| OK | ||
| ||
| 4. CLEAR REGISTERED DEVICE INFORMATION |
Clear all "Bluetooth" devices registered to the cellular phone and navigation receiver assembly.
Register the cellular phone as a connected device again and check if it is registered correctly.
- HINT:
- If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
- OK:
- Cellular phone can be registered.
|
|
||||
| OK | ||
| ||
| 5. CHECK USING ANOTHER VEHICLE |
Check if the cellular phone can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
- HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
- Make sure to obtain the customer's permission to perform this procedure.
- OK:
- Cellular phone can be registered.
|
|
||||
| OK | ||
| ||
| 6. CHECK USING ANOTHER CELLULAR PHONE |
Using another "Bluetooth" compatible cellular phone, register the cellular phone and check that it is registered correctly.
- HINT:
- Make sure to obtain the customer's permission to perform this procedure.
- After the inspection, clear the registered information and usage history acquired during the inspection.
- If operation of the cellular phone or navigation receiver assembly is requested, make sure to follow the instructions closely and perform the operation.
- Make sure to obtain the customer's permission to perform this procedure.
- OK:
- Cellular phone can be registered.
|
|
||||
| OK | ||
| ||
