Home › Engine / Hybrid System › 2KD-FTV ENGINE CONTROL › INTAKE AIR TEMPERATURE SENSOR(w/o DPF)
RM1840EF _51 Engine / Hybrid System _009568 2KD-FTV ENGINE CONTROL _0052063 INTAKE AIR TEMPERATURE SENSOR(w/o DPF) A

2KD-FTV ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR(w/o DPF)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INTAKE AIR TEMPERATURE SENSOR

a.

w/o Mass Air Flow Meter:

Install the intake air temperature sensor.


b.

w/ Mass Air Flow Meter:

Using a 22 mm deep socket wrench, install a new gasket and the intake air temperature sensor.

Torque:
29 N*m (300 kgf*cm, 22 ft.*lbf)


c.

Connect the intake air temperature sensor connector.


Hide 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (w/ Intercooler)