Home › Engine / Hybrid System › 2KD-FTV INTAKE / EXHAUST › INTERCOOLER(w/o DPF)
RM1840EF _51 Engine / Hybrid System _009590 2KD-FTV INTAKE / EXHAUST _0052340 INTERCOOLER(w/o DPF) A

2KD-FTV INTAKE / EXHAUST  INTERCOOLER(w/o DPF)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL INTERCOOLER ASSEMBLY

a.

Install a new gasket and the intake air connector with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Install the intercooler with the 4 bolts.

Torque:
12 N*m (122 kgf*cm, 9 ft.*lbf)


c.

Install a new No. 2 air hose and then tighten the 2 hose clamps.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


d.

Tighten the 2 hose clamps of the No. 1 air hose.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


Hide 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

a.

Install the engine cover with the 3 bolts and 2 cap nuts.

Torque:
7.0 N*m (71 kgf*cm, 62 in.*lbf)